Capture the complete designation
Send the complete code, including MC19P or MC24P suffixes and any additional marks. A shortened MC19 or MC24 query can locate references but cannot freeze a replacement specification.
Axem F / MC identification references
Parvex Axem MC19 / MC24 Disk-Rotor Replacement Review
Start from the exact MC-series suffix, feedback package and installed dimensions. The reference list identifies names found in a manufacturer-published conversion document; it does not assign an approved PancakeMotors equivalent.
Send Nameplate Details for Review ↗
Exact MC suffix, tachometer package and brake length
Information that determines the Axem F / MC identification references review
Check the tachometer package
Identify tachometer type, signal scale, polarity and wiring. Record its mechanical extension and connector orientation as part of the total installed length.
Record the brake scope
Describe the existing brake, release voltage and holding requirement. Include the flange-to-end distance with all feedback and brake options installed.
Measure the mounting interface
Capture the register, fixing pattern, shaft and coupling arrangement. Review the available assembly and service space, not just the motor-body diameter.
Set the permitted machine changes
State whether an adapter, new drive or feedback conversion is acceptable. The result of review should list retained and changed interfaces, with acceptance conditions.
Start with the complete code
Find a legacy motor reference.
Search the model, a family abbreviation or manufacturer. A result identifies equipment for review; every replacement proposal still needs mechanical, electrical and duty validation.
4 identification references. Status: engineering review required. Supply and current OEM availability are unconfirmed.
| Legacy nameplate reference | Manufacturer / family | Reference source | Next step |
|---|---|---|---|
| MC13S Axem F / MC identification references | Parvex / Axem | PMW Dynamics conversion reference ↗ | Review MC13S → |
| MC17H Axem F / MC identification references | Parvex / Axem | PMW Dynamics conversion reference ↗ | Review MC17H → |
| MC19P Axem F / MC identification references | Parvex / Axem | PMW Dynamics conversion reference ↗ | Review MC19P → |
| MC24P Axem F / MC identification references | Parvex / Axem | PMW Dynamics conversion reference ↗ | Review MC24P → |
Have a different suffix or unreadable plate?
Send the exact code or a controlled photo link. The absence of a search result does not prevent an industrial identification request.
Send nameplate details for review ↗Manufacturer names identify existing equipment. PancakeMotors is an independent engineering enquiry platform. Referenced catalogues and third-party conversion tables do not establish our affiliation, stock, authorisation or replacement compatibility.
Questions about this identification route
Are MC19P and MC24P proven compatible with your motors?
No compatibility is asserted by this reference index. Supply drawings and nameplate details for a project-specific assessment.
Can I begin with photos only?
Yes. Clear nameplate, flange/shaft and feedback-connector photos let the engineering team identify the information still needed. A controlled sharing link can be supplied instead of an attachment.
Check the source and the installed motor together.
Source documents identify legacy products. Actual option packages, application suitability, lifecycle status and replacement compatibility require confirmation for the complete nameplate code.
Review another legacy motor family
Kollmorgen / PMI U9M4 & U12M4 Replacement Review ↗Suffixes, shaft extensions and analogue feedbackKollmorgen / PMI JR16, JR24 & JR25 Retrofit Review ↗Ruggedized assembly, brake and support loadsYaskawa PMEE / Print Motor Replacement Assessment ↗Full model prefix, amplifier pairing and feedback polarity